System Sensor spectralert advance color lenses - Manual

General Description
SpectrAlert Advance color lenses come in four colors options including am-
ber, blue, green and red. The lenses are compatible with SpectrAlert Ad-
vance strobes including wall or ceiling mount and indoor or outdoor rated.
Note that color lenses must only be used with the non-fire printed devices
(-P plain models). Color lens strobes are UL Listed under 1638 (Visual Sig-
naling Appliances) for Private Mode General Utility Signaling. UL 1638
measures light output of strobe devices on-axis (straight on). See table be-
low for ratings. WARNING: Not to be used as a Visual Public Mode Alarm
Notification Appliance.
3825 Ohio Avenue, St. Charles, Illinois 60174
800/736-7672, FAX: 630/377-6495
www.systemsensor.com
installation anD Maintenance instrUctions
spectralert advance color lenses
For use with the following models: LENS-B, LENS-R, LENS-G, LENS-A,
LENS-BC, LENS-RC, LENS-GC, LENS-AC
I56-3253-00
1
FiGUre 1. color lens
installation to wall MoUnt strobe FiGUre 2. color lens
installation to ceilinG MoUnt strobe
AO-421-01 AO-422-01
installation
For SpectrAlert Advance models, please follow the instructions below for in-
stalling colored lenses.
1. Before applying the color lens to the strobe, clean the area around the
stobe lens.
2. Remove the red liner from the back of the color lens gently. Make sure
that the clear adhesive is still attached to the bottom flat surface of the lens.
3. Align the slot on the color lens with the candela indicator window on the
unit. This is a mistake-proof step only on the wall units.
4. Apply and press the lens against the unit.
Candela (Cd)
Switch Setting
On-Axis Cd Rating
(UL 1638)-All colors
15 15
15/75* N/A
30 30
75 75
95 95
110 110
115 115
135 135
150 150
177 177
185 185
* The 15/75 candela setting is not to be used with the color lens attachment.
SS-110-001 1 I56-3253-001
©2008 System Sensor