Alcatel-Lucent 6850 - Manual (Page 79)

Open Problem Reports and Feature Exceptions
OmniSwitch 6800/6850/9000—Release 6.1.3.R01 page 79
PR 99862
When an over stressed test caused 100% CPU usage on an OS6850, the "Unable to send running check-
sum" message was displayed, and the switch was rebooted.
Workaround: Avoid 100% CPU usage.
PR 100127
By default, an OS6850 switch is configured to run in strict-priority. If over-subscription is done on priori-
ties 6 & 7, it will bring down the switch.
Workaround: Over-subscription on priorities 6 & 7 is not yet supported on the switch. Do not configure
the over subscription with priority 6 or 7.
PR 105381
The flash file system on an OS6850 shows no space but allows copy anyway.
Workaround: Remove any unneeded files before performing copy.
PR 105646
The entPhysicalModelName MIB variable returns vendor name of SFP instead of model name for an
SNMP get/getNext call to this object on an OS6850.
Workaround: There is no known workaround at this time.
PR 106559
Output to STDOUT is re-directed to the PMD file on an OS9000. A printf is occurring that causes the
“show log” command to fail.
Workaround: The contents of the pmd file can still be viewed with vim, gvim, etc. as most of the
contents are ascii strings.
PR 106812
The "update default miniboot" is still supported on OS6850 even though there is no default or backup
miniboot.
Workaround: This command will still cause the miniboot to be updated properly.
PR 106649
The “update miniboot” command is not working on OS-9000.
Workaround: Use the “update uboot-miniboot” command to update the miniboot.