Teka DW8 59 FI - Manual (Page 11)

User instructions
11
After using the table to identify the most appropriate washing program:
• press
the ON/OFF button (1) and wait for the PROGRAM
INDICATOR LIGHT (2) to illuminate;
• keep pressing the PROGRAM SELECTION button (3) until the
indicator light corresponding to the desired program illuminates;
• close the door; after about 2" the program will start. While it is in
progress, the relative LIGHT will flash (indicating that the program is
being executed).
DURATION CONSUMPTION
PROGRAMME,
NUMBER & SYMBOL
LOAD CROCKERY
AND CUTLERY
PROGRAM
PROGRESS MINUTES
(2)
WATER
LITRES (1)
POWER
KWh (2)
1 SOAK
PANS AND DISHES
AWAITING
COMPLETION
OF THE LOAD
Cold prewash 15' 5,5 0,02
2
BIO (*)
EN 50242
DISHES WITH
NORMAL DIRT, EVEN
WITH DRIED-ON
RESIDUES
Cold prewash
Wash at 50°C
Rinse at 66C
Dry
180' ** **
3
NORMAL
IEC/DIN
DISHES
WITH NORMAL DIRT,
EVEN WITH DRIED-ON
RESIDUES
Cold prewash
Wash at 65°C
Cold rinse
Rinse at 70°C
Dry
113' 18 1,55
4 FAST
DELICATE DISHES
WITH LIGHT DIRT,
WASHED IMMEDIATELY
AFTER USE
Wash at 38°C
Cold rinse
Rinse at 58°C
38' 13 0,85
5 INTENSIV
VERY DIRTY PANS
AND DISHES, EVEN
WITH DRIED-ON
RESIDUES
Hot prewash
Wash at 70°C
Cold rinse (3)
Rinse at 70°C
Dry
150' 21 1,90
Only run the soak program with half loads.
Options cannot be used with the soak program.
(*) Reference program as per EN 50242 standard.
(**) See energy label.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
(3) 1 or 2 cold rinses depending on the model.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.