User instructions – Teka DW8 59 S User Manual
Page 29
29
BEFORE STARTING THE DISHWASHER AFTER PROLONGED
DISUSE:
x
Check that there are no deposits of sludge or rust inside the water
pipe: if there are, allow the water to run from the water supply tap for
a few minutes.
x
Plug the power cord back into the socket.
x
Reconnect the water intake hose and open the tap again.
TROUBLESHOOTING MINOR PROBLEMS
In some cases it is possible to remedy minor problems by referring to the
following instructions:
If the program fails to start, check that:
x
the dishwasher is connected to the electrical power supply;
x
there is no power failure;
x
the water tap is open;
x
the dishwasher door is properly closed.
If water remains inside the dishwasher, check that:
x
the drain hose is not kinked;
x
the drain siphon is not obstructed;
x
the dishwasher filters are not clogged.
If the dishes are not being cleaned properly, check that:
x
the correct amount of detergent has been added;
x
there is regenerating salt inside the special container;
x
the dishes are being loaded correctly;
x
the selected program is suitable for the dish types and their degree
of soiling;
x
all the filters are clean and positioned correctly;
x
the spray arm nozzles are not obstructed;
x
there is no object obstructing the rotation of the spray arms.
User instructions