Turntable installation, Countertop installation, Installation – Teka MWE 205 G User Manual

Page 36

Advertising
background image

Turntable Installation

Hub (underside)

Glass tray

Turntable shaft

a. Never place the glass tray

upside down. The

glass tray should never be restricted.

b. Both glass tray and turntable ring assembly must

always be used during cooking.

c. All food and containers of food are always placed

on the glass tray for cooking.

d. If glass tray or turntable ring assembly cracks or

breaks, contact your nearest authorized service

center.

Turntable ring assembly

Countertop Installation

Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.

Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
Do not remove the light brown Mica cover
that

is attached

to

the

oven

cavity to protect the magnetron.

Installation

1.

Select a level surface that

provide enough open space for
the intake and/or outlet vents.

(3) Blocking the intake and/or outlet openings

can damage the oven.

(4) Place the oven as far away

from radios and TV as possible.
Operation of microwave oven may

cause interference to your radio or TV

reception.

2. Plug your oven into a standard household

outlet. Be sure the voltage and the

frequency is the same as the voltage
and the frequency on the rating label.

A minimum clearance of 3.0 inches
(7.5cm) is required between the oven and
any adjacent walls. One side must be open.
(1) Leave a minimum clearance of 12

inches (30cm) above the oven.

(2) Do not remove the legs from the

bottom of the oven.

WARNING: Do not install oven over a
range cooktop or other heat-producing
appliance. If installed near or over a heat
source, the oven could be damaged and
the warranty would be void.

35

3.0 inch(7.5cm)

3.0 inch(7.5cm)

12 inch(30cm)

OPEN

Advertising