Teka Combo HL 45.15 - Manual (Page 18)

18
Programming the Cooking Stop Time
1. Touch the sensor with your fingertip until
the AUTO symbol starts to flash.
2. Select the cooking stop time by pressing the
+ or – sensor.
3. You will hear 2 beeps, the display will show
the current time and the AUTO symbol will
flash slowly to indicate that the oven will
switch off automatically.
4. Select a cooking function and temperature.
5. When the cooking time is up, the oven will
turn off, an alarm will sound and the AUTO
symbol will flash quickly.
6. Touch any sensor to stop the alarm and to
turn off the AUTO symbol. The oven will
switch on again.
7. Set the controls to to turn off the oven.
You can change the stop cooking time at any
time by touching the
sensor with your fin-
gertip until the AUTO symbol starts to flash
quickly and you see the stop time on the dis-
play. Now press the + or – sensor to change
the time.
Programming Cooking Time and Cooking
Stop Time
1. Touch the sensor with your fingertip until
the AUTO symbol starts to flash and 00:00
2. Select the cooking time by pressing the + or
– sensor.
3. You will hear 2 beeps, the display will show
the remaining cooking time, and the AUTO
symbol will flash slowly.
4. Touch the sensor until the AUTO symbol
starts to flash quickly. The display will show
the current time and the programmed cook-
ing time.
5. Select the cooking stop time by pressing the
+ or – sensor.
6. This will be confirmed by two beeps. The cur-
rent time will show on the display and the
AUTO symbol will remain lit.
7. Select a cooking function and temperature.
8. The oven will remain off and the AUTO light
will be on. The oven is now programmed.
9. When it is time to start cooking, the oven will
turn on and will operate for the programmed
cooking time.
10.While cooking, the display will show the
cooking time remaining and the AUTO sym-
bol will flash slowly.
11.When the cooking time is up, the oven will
turn off, an alarm will sound, and the AUTO
symbol will flash quickly.
12.Touch any sensor to stop the alarm and to
turn off the AUTO symbol. The oven will
switch on again.
13.Set the controls to to turn off the oven.
If you want to change the remaining cooking
time while the oven is on, press the
sensor
until the AUTO symbol starts to flash quickly.
Now press the + or – sensor to change the
time.
Child Safety Function
This function can be selected at any time while
using the oven.
To activate the function, press the + and – sen-
sors at the same time for several seconds. You
will hear a beep and see the word SAFE on the
display. The clock/timer is locked.
If the oven is off and you activate the child safe-
ty function, the oven will not work even if a
cooking function is selected.
If this function is activated while you are cook-
ing, it will only lock the electronic clock/timer
settings.