Teledyne LeCroy OC1024 Oscilloscope Cart - Manual (Page 8)

8
!
!
12
13
14
Large Wrench
2 Large Lock
Washers
2 Rods
2 Long
Screws
Illustration 12: Loosely preassemble the two Long Screws and two Rods with Large Lock Washers to the Legs.
Illustration 13: Orient the nonlocking caster with the tab in the Top Shelf and slide the Leg and Tray Assembly onto the Posts.
Illustration 14: Fit the Long Screws into the mating hole inside the Posts, lightly tighten the screw ensuring it has correctly
engaged the hole.
!