Teledyne LeCroy PeRT3 Eagle Systems - Manual (Page 69)

PeRT 3 Eagle User Manual Version 1.6
LeCroy Corporation
65
The normal appearance (when the Main tab is selected) of the System Control Ribbon is
as follows:
There are multiple panels within the System Control Ribbon. When the Main tab is
selected, these panels include Master Controls, PeRT
3 Selection, Configuration, DUT
Initialization and DUT Status. The functions of these panels (and of the other tabs) are
described in “System Control Ribbon - Main Tab” on page 23.
If the PeRT 3 main application window is not wide enough to display all five panels, the
panels will adopt a condensed appearance, starting with the panel on the far right, in
order to fit the available space. The System Control Ribbon will then appear as follows:
To access any of the condensed panels, click on the green button that shows in the
condensed and the full panel will appear:
Commands and fields available within that panel can then be accessed, and the panel
will re-condense if the green button is pressed again or if you click anywhere outside the
area of the expanded panel.