Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 220)

LeCroy Corporation Scenario Example
218 SierraNet M408 Protocol Analyzer User Manual
In terms of InFusion testing, a state defines test “behavior.” In this context, behavior is
“waiting” for an Event and responding with an Action or set of Actions that happen
simultaneously.
Keep in mind that a test state you implement with the Global Rules operates in parallel
with the active test state of each sequence in the Scenario.
In effect, InFusion lets you do up to three line tests at the same time. You can do one test
with the Global Rules and a separate test with each sequence you create. You can have up
to two sequences in a Scenario.
1. Select Traffic Direction from the drop‐down list to choose the direction of traffic to
monitor the selected Event (the default is From P1/P3, which is selected for this
example).
2. In the Global Rules panel (see Figure 4.13 on page 218 ).
3. Select DWORD Matcher in the Event panel and place it in the Global Rules panel
(see Figure 4.14 on page 219 ).
Figure 4.13: Global Rules Panel