Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 User Manual
Page 202
Advertising
Teledyne LeCroy
InFusion Scenarios
200
SierraNet M408 Protocol Analyzer User Manual
Click the Add State button to drag and drop events in the Sequence 1 and Sequence 2
panels and assign actions to them. If Actions are not assigned a yellow Caution message
displays. If invalid actions are assigned then a red Warning icon displays.
Figure 4.4: Add State InFusion Scenario Manager
Note:
The Insert State command inserts a new state after the current state. Plan carefully while
creating scenarios or you might have to insert a state after state 0, copy and paste from state 0
to the new state, and clear out state 0, in order to accomplish what "Insert State" does.
Advertising