Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.30 - Manual (Page 45)

37
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.3
• When you click Stop before or after a Trigger event, the Progress
Bar adjusts accordingly to begin uploading the most recently
recorded data.
If you wish to abort an upload that is in progress, click the Stop button
again.
The Progress Bar fills with color in proportion to the specified size and
actual rate at which the hardware is writing and reading the recording
memory. However, the Progress Indicator is normalized to fill the space
within the Status Bar.
Recording Status
During recording activity, the current Recording Status is temporarily
displayed in the next segment. When you activate the Record function, this
segment flashes one of the following messages (depending on the selected
Recording Options):
— Trigger?
— Triggered!
— Uploading
After recording stops,
— The flashing message changes to Uploading data– x % done
(x% indicates the percentage completion of the data
uploading process).
— The traffic data is copied to disk (overwriting any previous
version of this file) using the default file name data.ibt or a
new name specified in the Recording options.
To abort the upload process,
Press Esc on your keyboard
OR
Again click in the Tool Bar.
You are prompted to choose whether to keep the partially uploaded
data or to throw it away.
When the data is saved, the Recorded Data file appears in the main display
window and the Recording Status window is cleared.
• If the recording resulted from a Trigger Event, the first packet
following the Trigger (or the packet that caused the Trigger) is
initially positioned second from the top of the display.