Teledyne LeCroy PCIe Gen3 M.2 Socket2 Adapter Quick Start - Manual (Page 6)

Configuration
Use the tables below to configure the adapter for specific test situations.
SW1 Device Presence Table
J12 Header Table (pin out B-key adapter)
Test Points Table
SW1.1 SW1.2 Presence Declared
ON ON Reserved
ON OFF X1 Device
OFF ON X2 Device
OFF OFF Reserved
Pin
No. Termination Pin
No. Signal Name Pin
No. Termination
A1 1K Pull down B1 UIM_PWR C1 0 Pull-up to 1.8V
A2 1K Pull down B2 UIM_DATA C2 4.7K Pull-up to 1.8V
A3 1K Pull down B3 UIM_CLK C3 4.7K Pull-up to 1.8V
A4 1K Pull down B4 UIM_RESET C4 4.7K Pull-up to 1.8V
A5 NC B5 NC C5 NC
Test Point Signal Name
TP1 SUSCLK
TP21 USB_D-
TP22 USB_D+
5