Teledyne LeCroy PCIe Gen3-TestPlatform With SRIS Quick Start - Manual

Introduction
Use this document for quick installation and setup.
If you experience problems or need more information, see
the Summit Z3-16 User Manual at the Teledyne
LeCroy web site.
Teledyne LeCroy's PCI Express 3.0 Test Platform for the
Summit Z3-16 Protocol Exerciser provides a convenient,
powerful and flexible test platform for PCI Express devices
at data rates up to 8 GT/s and lane widths up to x16.
The Test Platform allows the Summit Z3-16 Exerciser to act
as a host system, enabling extensive protocol-level testing
of PCIe
®
devices. In addition, there is a complete Gen3
protocol analyzer interposer built into the platform complete
with iPass connectors for up to x16 lane support.
For use as a host emulator, the Summit Z3-16 Exerciser is
plugged into the dedicated PCIe slot and connected to the
power source provided by the Test Platform. The DUT is
plugged into the PCIe x16 slot, and connected to either the
6-pin or the 8-pin 12V power sources provided on the Test
Platform.
Switches on the platform allow the user to select internal or
external reference clocks separately for the Summit Z3-16
and DUT, SSC, SRIS, CLKREQ# and power for the DUT.
Connectors on the platform include two PCIe x16 slots,
dual Ref Clock IN and OUT, dual iPass connectors for
connection to a Teledyne LeCroy protocol analyzer such as
the Summit T3-16, and DC power connectors (2-pin for the
Summit Z3-16, and the choice of 6-pin or 8-pin for the
DUT).
In addition to using the Test Platform with the Teledyne
LeCroy Summit Z3-16, the user can connect two of their
own devices and use the Test Platform as a PCIe
backplane and as an interposer to capture protocol traffic
between the systems.
PCI Express Test Platform for
Summit™ Z3-16 Exerciser with
CLKREQ# and SRIS Support
Quick Start
1
Unpacking the Test Platform
Inspect the received shipping container for any damage. Unpack the container and account for each of the system
components listed on the accompanying packing list. Visually inspect each component for absence of damage.
In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.
3
Components
The package includes the following components:
• PCI Express Test Platform for Summit™ Z3-16 Exerciser with CLKREQ# and SRIS Support
• AC power cord
• 2 pin DC power cable for Z3
• DUT auxiliary DC power cables
2