Teledyne LeCroy PCIe Gen3 SFF-8639 Interposer With SRIS Quick Start - Manual

Components
The analyzer package includes the following components:
•
SFF-8639 single-port interposer card
• DC Power Adapter (12 volts)
Inspect the received shipping container for any damage. Unpack the container and account for each of the system
components listed on the accompanying packing list. Visually inspect each component for absence of damage.
In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.
Introduction
Use this document for quick installation and setup.
Teledyne LeCroy’s SFF-8639 single-port interposer card provides a quick and simple means for protocol analysis of Solid
State Drives (SSDs) based on PCI Express (PCIe
®
) protocols. The SFF-8639 Interposer Card, used with a Summit Protocol
Analyzer, enables PCIe bus traffic between a host backplane and SSD device to be monitored, captured, and recorded for
protocol analysis. The card is compatible with the Summit T3-16, Summit T3-8, Summit T28 and Summit T24 and supports
data rates of 2.5 GT/s, 5 GT/s and 8 GT/s.
SFF-8639 Single-Port Interposer Card
1
SFF-8639 Single Port Interposer for PCI Express
®
3.0
with SRIS Support
Quick Start
2