Teledyne LeCroy SAS_SATA Automation API manual - Manual (Page 45)

Automation API for Teledyne LeCroy SAS/SATA Protocol Suite 39
SASAnalyzer Object Teledyne LeCroy
//‐‐‐ Sierra M6‐2 Configurations ‐‐‐‐
DEVICE_CONFIG_AHE_0_0_0 = 90,
DEVICE_CONFIG_0_AHE_0_0 = 91,
DEVICE_CONFIG_ADE_0_0_0 = 92,
DEVICE_CONFIG_0_ADE_0_0 = 93,
// ‐‐‐‐‐‐ DE & HE together ‐‐‐‐‐‐‐‐
DEVICE_CONFIG_AHE_0_ADE_0 = 100,
DEVICE_CONFIG_ADE_0_AHE_0 = 101,
DEVICE_CONFIG_DE_DE_HE_HE = 102,
DEVICE_CONFIG_HE_HE_DE_DE = 103,
DEVICE_CONFIG_HE_DE_HE_DE = 104,
DEVICE_CONFIG_HE_DE_0_0 = 105,
DEVICE_CONFIG_HE_DE_A_A = 106,
DEVICE_CONFIG_AT_0_AT_0 = 108,
DEVICE_CONFIG_T_0_JA_0 = 109,
DEVICE_CONFIG_AJA_0_AJA_0 = 110,
DEVICE_CONFIG_0_AHE_0_0 = 111,
DEVICE_CONFIG_0_AJA_0_AJA = 112,
Remarks
Before you run any function on your board, you must specify its port configuration before
running Analyzer, Exerciser, Sierra/STX, or InFusion. Port configuration specifies what
functionality should be considered for each port of the specified board.