Teledyne LeCroy Conquest API Manual - API Manual - Manual (Page 8)

IUsbGeneral Services Interface
2
IUsbGeneral Services Interface
SetPort
Declaration: long SetPort(short sPortType)
Input(s): sPortType specifies hardware port type.
Valid port types are introduced in API Constants.
Return Value: Zero if the SetPort was successful. Otherwise, non-zero.
Each non-zero value indicates an error code.
Remark: This method sets the port type and connects the software to the
hardware.
See Also API Errors
IsHardwareStoped
Declaration: long IsHardwareStoped(BOOL* bIsStoped)
Input(s): bIsStoped specifies hardware stop flag.
Return Value: Zero if the IsHardwareStoped was successful. Otherwise, non-zero.
Each non-zero value indicates an error code.
Remark: This function sets bIsStoped to TRUE if hardware is stopped.
Otherwise, sets to FALSE. Returns error code if an error occurs.
See Also API Errors
Method Description
SetPort Set hardware attached port.
IsHardwareStoped Is hardware stopped?
SaveOutFiles Save output file of last run project.
EnableProtocolError Enable or disable protocol errors by Type.
IsEnableProtocolError Is protocol error type enabled or not.
GetMaxMemorySize Get the maximum size of memory.
AttachDevice Attach device.
DetachDevice Detach device.
SaveSmpAsText Save captured data in a text file.