Teledyne LeCroy UWBTracer Getting Started Guide - Manual

Host Machine PC Requirements
The UWBTracer/Trainer system is controlled and operated
through a software application that you must install and run on a
Windows-based PC (the host machine). The requirements for the
host machine are:
Operating System: Microsoft
®
Windows
®
2000, XP, or Vista.
Browser: Microsoft Internet Explorer, version 5 or newer.
Processor: Intel
®
Pentium
®
4, AMD Athlon
™
/AMD Duron
™
, or
newer compatible processors with clock speed of at least 2 GHz.
Memory: Minimum is 512MB of RAM. For best performance, use
physical RAM at least as large as the size of the recording buffer,
up to 2 GB. To find and set the size, see the Recording Options
section.
Hard Disk: 25 MB of free hard disk space is required for
installation. Additional disk space is needed for operation of
applications and for storing recorded data in files, each of which
can be as much as 2 GB. Hard disks with fast access times are
recommended.
Display: Resolution of at least 1024 x 768 with 24-bit color depth
is recommended (resolution of 800 × 600 with 16-bit color is a
minimum).
Connectivity: For high-speed uploads, a USB 2.0 interface is
recommended (USB 1.1 is a minimum). Not required if the
application is used only to view pre-recorded traces.
Please see the Readme file on the installation CD for the latest
information on PC requirements.
UWBTracer/Trainer™
WiMedia Ultrawideband
Protocol Analyzer and Exerciser
Getting Started
Before Getting Started
Use this document for quick installation and setup. If you
experience problems or need more information, see the
UWBTracer/Trainer User Manual on the Installation CD or at the
LeCroy web site. For details about the latest software version, see
the Readme file on the Installation CD.
Components
The UWBTracer/Trainer basic components are:
•
Installation CD-ROM [not shown]
• CATC 5K Platform [1] shown with the UWB Analyzer Plug-in
Module and the UWB Exerciser Plug-in Module installed
• Power Supply [not shown]
• Vertical Stand [2]
• UWBTracer Analyzer Plug-in Module [3]
• UWBTrainer Exerciser Plug-in Module [15]
• Antenna [4]
• RF Coaxial Cable (SMA) [5]
• Synchronization Cable [6]
• Trigger Cable [7]
• USB Cable [not shown]
• Carrying Case (optional) [not shown]
CATC 5K and Stand UWBTracer Plug-in Module
Standard Cables UWBTrainer Plug-in Module
The optional MPI Kit includes:
•
Adapter Cable (SCSI) [8]
• Probe Cable for IDE 40-pin Connectors and Hirose 68-pin
Connectors [9]
• Probe Cable for IDE 40-pin Connectors and Hirose 68-pin
Connectors [10]
• Cable Adapter for Hirose 68-pin or IDE 40-pin
Connectors [11]
• Board Adapter for IDE 40-pin Connectors [12]
• Board Adapter for Hirose 68-pin Connectors [13]
• Board Adapter for Hirose 60-pin Connectors [14]
MPI Kit
Please see the UWBTracer/Trainer User Manual on the
installation CD for component specifications.
1
3
2
15
4
3
5
7
6
8
11 12 13
14
9 10
1
2