Teledyne LeCroy QPHY-UWB - Manual (Page 30)

30
QPHY-UWB-OM-E Rev C
boxes under the Test Selector tab. Note that in order to control which TFC values you want in the test sequence
you need to edit the variable called TFC accessed under the Variable Setup tab.
Generating a Report
At the end of the test a dialog will ask what type of output report you want. A readable report can be produced in
either HTML or PDF format. An XML output can be used if you want to transfer the data into a database program
such as Microsoft Access.
Data from all past test runs are saved in a database by QualiPHY. Currently these are only accessible through the
Advanced tab found in the General Setup Dialog. Under this tab select the Switch to Expert Mode button,
which will bring up what is known as the X-Replay program. In the lower left window on the screen are listed all
the tests you have run. When you click on one, you will see summary information about that run in the lower right
window. When you find the run you want to get output on, select it, and then select Create Report from the
Report menu off the main menu bar.
§ § §