Ultraw a ve bs plus, Ultrawave bs plus – ADC UltraWAVE WAVE BS Plus User Manual

Page 2

Advertising
background image

6/08

106401AE

UltraW

A

VE

BS

Plus

UltraWAVE BS Plus

GSM Base Station Controller and Base Transceiver Station

2

w w w . a d c . c o m

+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0

1 - 8 0 0 - 3 6 6 - 3 8 9 1

The UltraWAVE BS Plus supports up to twelve TRXs in one chassis or up to nine TRXs with external BTSs.
With a single compact chassis, it can support an S444 site. It has the industry leading power amplifier
at 50 Watts when configured for 850 MHz and 900 MHz GSM networks. UltraWAVE supports all the
key BTS features, such as frequency hopping, sectorization, and GPRS. It provides sufficient capacity for
urban high capacity coverage (up to S666) and is flexible enough to scale from S222 to S666 supporting
the popular BTS configurations, S222 and S333. It increases the BTS coverage with industry leading
power output (50W measured at antenna port without combining). Receive sensitivity with antenna
diversity is up to -114 dBm. Designed for easy expansion of the BTS capacity, the UltraWAVE BS Plus is
field upgradable. Operators can start with a small system and pay as they go to add capacity.

The UltraWAVE BS Plus is designed for low cost maintenance with remote monitoring, external alarms,
overheating protection, redundant power supply, field replaceable modules, and easy front access. It can
reduce the on-going operation expenses for the operators. An integrated turn-key BTS package option
is available with transmission, battery, and other site equipment.

Features

Available in 850, 900, 1800 and 1900 MHz

frequency bands

Frequency hopping

Sectorization

General Packet Radio Service (GPRS)

Dynamic power control (uplink and downlink)

Significantly improved BTS sensitivity:

-114 dBm (optimal combining diversity) or
-111 dBm (no diversity)

Remote monitoring: Temperature, fan, power

supply (PSU), power amp, VSWR can be
monitored from central office enabling remote
diagnosis and quick recovery

External alarms for third party equipment are

also supported

Optional redundant power supply with PSU failure

alarm support

-48 VDC power supply

Integrated full rack solution available: UltraWAVE

integrated with additional on-site equipment such
as transmission, battery backup, etc. in one rack

Common hardware modules:

single slot TRX, ICP, RFU

Advertising