Telexper Commander Station - Manual (Page 4)

3
System Setup Flow Chart
Take out nCS from the carton box
(Important: Please ensure power-in switch on the back
of nCS is local voltage)
Install HDD to caddy case
(Important: 3.5” SATAII, III HDD is strongly
recommended. Ensure to lock the HDD power switch or
else the system will not detect the HDD!)
Ensure connection of IP cameras to
PoE Hubs, PoE Hubs to nCS.
Check the Monitors, Keyboard,
Mouse, Power cord…etc are
connected
Finish, system start working
Log in to CMS
Username: admin
Password: 99999999
Power on the system, it would auto-setup at first launch
First-time launch with new HDD: Choose Format ALL
Adding new HDD to the system: Choose Format
(For first time installation, CMS will start after 3-5 times
reboot)