Telexper IP Video Storage System nVR-15W/15RW - Manual (Page 4)

3
4. Enter User Name: RAID, Password: hpt, and then click .
5. After log in successfully, you will see Logical Device Information page.
Ensure the quantity of HDD is correct. If not, please turn off the system to check
whether HDDs were inserted properly or were defective.
Under Physical Device Information section, you can distinguish the new/used
status of the HDDs from the HDD icon. HDD icon with letter L (Legacy) on it is for
used HDD. HDD icon without any letter is for new HDD.