Terk FDTV1A_OMЙ - Manual (Page 7)

FD
TV1a
6
Installation
(continued)
FDTV1a Built-In
Coaxial Cable
TV
2. Connect the FDTV1a’s built-in
coaxial cable to the antenna
input on your TV.
3. Run your TV’s tuner/channel
setup to scan for available
broadcast channels.
To connect the FDTV1a without the amplifier directly
to your TV:
1. Make sure your TV is turned off.
Note about digital channels
To display digital signals on your TV, you’ll need
to have the right equipment: either a TV that is
capable of decoding digital signals or a digital
converter box.