Terk HDTVI_OMЙ - Manual (Page 6)

Operating Your TERK
HDTVi Antenna Pro
1. Rotate the antenna base so that the small end of the
UHF element faces the broadcast tower to seek the
best quality picture.
See Fig. 5.
Use the web to find where the broadcast towers are located:
1. Go to www. terk.com and click the “Antenna Locator.”
2. Enter your home’s address and then “Submit.”
3. Click “View Street Level Map” to see which direction
you should point your antenna towards.
2. Once you have positioned the UHF elements to receive
the best UHF picture channels 14-69, then extend the
two dipoles.
For best results on channels 2 through 6, extend the
dipoles to their full length and position them horizontally.
For channels 7 through 13, shorten the dipole elements
and place at a "V" angle as required.
HD
TVi
4
Fig. 5