Terk HDTVA_OMЙ - Manual (Page 5)

Installation
(continued)
Connecting Your HDTVa
1. Connect the cable from the HDTVa antenna to the
Power Injector terminal labeled TO ANTENNA.
2. Connect the TO TV lead on the Power Injector to the
ANT/AIR IN or VHF/UHF on your TV or set-top box.
3. Plug the Power Adapter from the Power Injector into
a standard AC outlet.
4. Switch the Power Injector “ON” for amplification.
See Fig. 4.
Note: The Power Injector MUST always be plugged into
an AC outlet, even if it is turned to the OFF position.
Locating Your HDTVa
Your HDTVa is a precision instrument and should be
placed in a location that is best for receiving TV signals.
Your HDTVa can be placed on top of any standard TV for
ease of adjustment.
HD
TV
a
3
Fig. 4 TO TV
TO Antenna
OFF/ON