Terk HDTVO_OMЙ - Manual (Page 15)

13
To mount the HDTVo on a traditional mast:
1. Locate:
– HDTVo antenna
– (4) 1.75” threaded bolts
– (4) 1.75” nuts
– (4) washers
– Antenna bracket
– 3” partially threaded bolt
– 3/8” screw
2. Using the four 1.75” threaded bolts, the four washers and the
four 1.75” nuts, attach the antenna bracket and the pole clamp
to the mast. Position the HDTVo antenna as high as possible
on the mast.
3. Slide the back of the antenna into the antenna bracket.
4. Insert the 3” partially threaded bolt and the 3/8” screw into
the holes on the top of the antenna bracket, and partially
tighten the bolt.
5. With the 3” partially threaded bolt only partially tightened,
adjust the antenna so that it is precisely pointing towards
the broadcast tower (see “Positioning the HDTVo”).
6. Tighten the 3” partially threaded bolt and the 3/8” screw,
securing the antenna in the antenna bracket.
7. Skip to the “Connecting the HDTVo to a TV” section to
complete installation.
HD
TV
o