Terk FM+_OMЙ - Manual (Page 2)

Locating Your FM+
For Best Results
1. All antennas are affected by electromagnetic fields.
To maximize performance, position your FM+
antenna away from direct contact with receivers,
tuners, CD players, TVs and computers.
Note: Antennas work best when CD players, VCRs
and computers are turned off.
2. Keep the antenna away from large metal objects.
Placing the FM+ near a window often provides
the best results.
3. On occasions, certain areas in your home may be null
points or dead spots where no radio signal can be
received. This may also occur in metal-frame buildings
and houses with aluminum siding. In this case, simply
move your antenna, trying different locations, until the
best reception is achieved.
4. In weak signal areas, optimun tuning is achieved with
your receiver's scan button in the off position.
FM+
2
Making Connections
With Your New FM+ Antenna
Radio tuners and receivers can have different
connections for your new FM+ antenna. Please find
the connection that best matches your tuner or
receiver and follow the listed instructions.
FM Connections:
75 Ohm Coaxial:
Your TERK antenna has a Slip-On Coaxial connector
on the FM lead. Simply slide the connector onto the
coaxial terminal.
See Fig. 1.
75 Ohm Push-Button Connection:
If your Radio tuner or receiver has Push-Button
terminals for FM you will need to use the supplied
RED 75 Ohm matching transformer. First slide the
RED 75 Ohm matching transformer into the connector
on the FM lead of the antenna. Next slide the Red wire
into the terminal marked “FM 75 Ohm”. Lastly
connect the BLACK wire into the terminal marked
“FM Ground” or “GND”.
See Fig. 2.
FM+
1
Fig. 1 Fig. 2