Terk EDGE_OMЙ - Manual (Page 4)

Making Connections
With Your New FM Edge
Radio tuners and receivers can have different
connections for your new FM Edge antenna. Please find
the connection that best matches your tuner or receiver
and follow the listed instructions.
FM Connections:
75 Ohm Coaxial:
Your TERK antenna has a Slip-On Coaxial connector
on the FM lead. Simply slide the connector onto the
coaxial terminal.
See Fig. 1.
75 Ohm Push-Button Connection:
If your radio tuner or receiver has push-button terminals
for FM, you will need to use the supplied RED 75 Ohm
matching transformer. First, slide the RED 75 Ohm
matching transformer into the connector on the FM lead
of the antenna. Next, slide the RED wire into the terminal
marked “FM 75 Ohm”. Lastly, connect the BLACK wire
into the terminal marked “FM Ground” or “GND”.
See Fig. 2.
EDGE
1
Fig. 1 Fig. 2