Avaya 1140E IP - Manual (Page 301)

Multiuser
301
• If not, Call Forward is activated for all accounts using the key's target.
For both
single
and
all
keys, you can treat the key as a toggle. If no Call
Forward or DND operations are selected, pressing the key switches one
or all accounts between forwarding to the key's target and not forwarding
states.
The Call Forward mode and target for each account is persistent. If you
restart the IP Deskphone or logout and login, the Call Forward state is
retained.
Presence
Selecting the
Presence
command from the
Services
menu prompts you
to specify which presence state of the account should be modified. The
option
all
lets you configure all accounts to the same presence in one
operation.
If you select a single account, then the current state of the account is
displayed and you are prompted whether it should be changed. You are
then prompted to enter the new presence state. The new presence state
is applied after it is confirmed.
If the option is selected, no current state is displayed, and you are
immediately prompted to select the new state. The new state is then
applied to all registered accounts.
When using a programmed Presence feature key, the account that is
impacted by the Presence feature key is determined after the feature key
is configured.
After a single-account Presence programmed key is pressed:
• If the account is already configured to the programmed presence
state, then the account is configured back to the
Connected
presence state.
• If not, the account is configured to the programmed presence state.
After the
all accounts
Presence programmed key is pressed:
• If all accounts are already configured to the programmed presence
state, then all accounts are configured to the
Connected
state.