Terk LFIRX_OMЙ - Manual (Page 6)

5. Move the Unit that appears not to be working to another
location and try it again.
6. Attach the Infrared Extender to the Receiver for
situations where there is an obstruction (TV Cabinet,
etc.) between the Receiver and the component
Notice: Any change or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
LF-IRX
10
Troubleshooting:
1. Make sure both units are plugged into a standard
electrical outlet.
2. If the LED light inside the Transmitter does not
illuminate when the Remote Control is operated:
• Make sure you are pointing at the front of the
Transmitter (the IR logo is on the front).
• Make sure you are within 18 feet of the front of the
Transmitter (depending on the range of your
individual remote control, it may be necessary to
move closer to the Transmitter).
• Make sure nothing is blocking the path between the
remote and the Transmitter.
3. If your component does not respond when a remote
control is used, but the LED on the Receiver is lit:
• Make sure the Receiver is within 20 feet of your
component equipment
• Make sure the IR logo on your Receiver is pointing at
the front of your component.
• Make sure there is a clear path between the Receiver
and your component.
4. If the LED light on the Transmitter lights when you
operate the remote, but the LED on the Receiver does
not:
• Extend the antenna all the way up or move the
antenna to a different position for better reception.
• Make sure the Transmitter is no more than 100 feet
from the Receiver.
LF-IRX
9