Tracer TP-9365 PRO-Vac AM08048 - Manual (Page 7)

Warranty and Liability
Your PRO-Vac Vacuum/Micron Gauge is of the fi nest design
and craftsmanship. As such, Tracer Products warrants that when
delivered it will be free from defects in manufacture.
Tracer Products’ obligation under this warranty is limited to
repairing or replacing, at the option of Tracer Products, any
part(s) of the product which, if properly installed, used and
maintained, proves upon factory examination to have been
defective in materials or workmanship within one year from the
date of delivery.
Tracer Products does not warrant items that deteriorate under
normal use, including power cells and sensors. In addition,
Tracer Products does not warrant any instrument that has been
subjected to misuse, negligence or accident, or has been repaired
or altered by anyone other than Tracer Products.
This warranty is in place of all other warranties of quality. There
are no other warranties either oral, written, express, implied or
statutory. IMPLIED WARRANTIES OF FITNESS FOR PURPOSE
AND MERCHANTABILITY ARE EXCLUDED. This warranty and
your remedies thereunder are solely as stated in this manual.
In no event shall Tracer Products be liable for special, indirect,
incidental or consequential damages, nor for any damages arising
out of delay in shipment or production.
Return Authorization Procedure
A defective PRO-Vac should be returned to your wholesaler for
warranty evaluation. If you have any questions, please contact the
Customer Service Department at Tracer Products.
NOTE: Do not return your defective unit directly to the factory
without fi rst contacting Tracer Products for a Return Authorization
Number.
7