TREND T_PI User Manual
T/pi prt insertion temperature sensor, Installation instructions
T/PI PRT Insertion Temperature Sensor Installation Instructions TG200825 Issue 1/C 25/06/07
1
Installation Instructions
T/PI
PRT Insertion Temperature Sensor
Important: Retain these instructions
106 mm (4.17”)
17 mm (0.67”)
150 mm (5.91”)
9.5 mm
(0.37”)
27 mm (1.06”)
2 mm hexagonal socket
grub screw (each side)
Pockets for use as immersion sensor
Brass (POC/B/6)
Stainless Steel (POC/SS/6)
Dimensions
Installation
1
6 mm (0.24”)
T/PI Installation
Instructions TG200825
T/PI-L 400 mm (15.75”)
T/PI-S 150 mm (5.91”)
85 mm (3.35”)
57 mm (2.24”)
UNPACKING
ACC/DF/6
105 mm (4.13”)
50 mm
(1.97”)
6 mm
compression
fitting
3 x 4 mm diam. holes
on a 30 mm (1.18”) PCD
Mounting flange for use as duct sensor
Universal Fitting Kit for immersion sensor
use in existing pockets
clip
spring
brass bush
hexagonal
socket grub
screw
½” BSPT