2 nx drive stand alone with start/stop contactor, Nx drive stand alone with start/stop contactor, Installation on a trend system – TREND NX Variable Speed Drives User Manual
Page 15
Advertising
Installation on a Trend System
2.2.2
NX drive stand alone with start/stop contactor
This application is similar to the previous, but now there is a start/stop
contactor which stops the drive by both isolating the supply to the drive, and
breaking the connection between terminals 6 and 8 (via contacts C1). The
isolating switch will isolate both the drive and the start/stop contactor.
NX Variable Speed Drives Installation Manual TG200434 Issue 3/A 04/07/2006
13
Advertising