TREND RN - Manual (Page 9)

2 Specifications are subject to change without notice (30.09.2005)
Thermal Specifications
RN.F..30 RN.F..50
Operational temperature -20° to +70°C (-4° to +158°F) -20° to +70°C (-4° to +158°F)
Storage temperature -20° to +100°C (-4° to +212°F) -20° to +100°C (-4° to +212°F)
Junction temperature < 125°C (257°F) < 125°C (257°F)
R
th
junction to ambient (AC load) 2.8 K/W 1.7 K/W
General Specifications
RN.F12... RN.F23... RN.F48...
Operational voltage range 85 to 140 VAC 85 to 265 VAC 190 to 530 VAC
Non-rep. peak voltage 800 V
p
800 V
p
1000 V
p
Varistor voltage 275 VAC 275 VAC 510 VAC
Zero voltage turn-on < 10 V < 10 V < 20 V
Operational frequency range 45 to 65 Hz 45 to 65 Hz 45 to 65 Hz
Power factor at rated voltage
≥
0.9
≥
0.9
≥
0.9
Average output power 0 to 100% 0 to 100% 0 to 100%
Output power resolution 1/64 of 100% 1/64 of 100% 1/64 of 100%
Approvals UL, cUL, CSA UL, cUL, CSA UL, cUL, CSA
CE-marking Yes Yes Yes
Norms fulfilled EN 60947-1 Low-voltage switchgear and control gear. Part 1- General Rules.
EN 61000-6-1 Generic Immunity Standard. Residential, Commercial & Light Industry Environment
EN 61000-6-2 Generic Immunity Standard. Industrial Environment
Output Specifications
RN.F..30 RN.F..50
Rated operational current
RN1F.. AC51 @Ta=30°C 30 A 50 A
“ @Ta=40°C 30 A 50 A
“ @Ta=50°C 23 A 38 A
“ @Ta=60°C 20 A 30 A
RN2F.. AC51 @Ta=30°C 30 A total sum (2 x 15A) 50 A total sum (2 x 25A)
“ @Ta=40°C 30 A total sum (2 x 15A) 50 A total sum (2 x 25A)
“ @Ta=50°C 23 A total sum (2 x 11.5A) 38 A total sum (2 x 19A)
“ @Ta=60°C 20 A total sum (2 x 10A) 30 A total sum (2 x 15A)
Zero crossing detection Yes Yes
Min. operational current (per pole) 500 mA 500 mA
Rep. overload current t=1 s
(Tj init.=25°C) 55 A (rms) 125 A (rms)
Non-rep. surge current t=10 ms
(Tj init.=25°C) < 300 A
p
< 580 A
p
Off-state leakage current,
@ rated voltage and frequency
(Tj.=125°C, max.) < 6 mA < 6 mA
I 2 t for fusing t=1 to 10 ms 450 A 2 s 1680 A 2 s
Critical dV/dt off-state 500 V/µs 500 V/µs
RN 1F
Input Specifications
RN.F..I..
Current controlled input
Control current range 4 - 20 mA
Allowable input current 50 mA
Reverse polarity protected Yes
Voltage drop 10 VDC @ 20 mA
RN.F..V..
Voltage controlled input
Supply voltage range 21 - 27 VAC, 12 - 32 VDC
Supply current 30 mA @ 24 VAC/32 VDC
Control voltage range 0 - 10 V
Control input current 0.1 mA @ 10 VDC