Vanguard TTRA (ATRT-01, ATRT-03, ATRT-03A, and ATRT-03B) - Manual (Page 33)

REV 5 TTRA VERSION 12.x SOFTWARE MANUAL
30
5.3 Transferring Test Plans to an ATRT
To transfer a test plan from the PC hard drive to an ATRT:
1. From the File menu or the Test-Plan menu, click on Upload Test Plan to ATRT. The
following window will be displayed:
• The top left section of the window displays the name of the directory where the test
plans are being listed from. If you wish to transfer test plans from a different
directory, click on the “Path:” button and browse to the folder containing the test
plans.
• If you would like to print the current directory listing, click on the “Print Directory”
button at the bottom of the window. Select the printer to print to and click on the
“OK” button.
2. Click on the filename you would like to transfer to the ATRT and click on the “OK”
button. The following window will be displayed showing a listing of the ATRT’s test plan
memory locations and their contents: