Vanguard CT-7500 S2 - Manual (Page 96)

CT-7500 S2 USER’S MANUAL REV 2
91
e. The following screen will be displayed:
Press the [1] key to print every data point. The data points will be printed and you will
be returned to the “START-UP” menu.
Press the [2] key to print every 5 data points. The data points will be printed and you
will be returned to the “START-UP” menu.
A partial data points printout is shown in Figure 35.
WARNING
Due to the large number of data points, even selecting the “Every 5 Points”
option will produce a VERY long report printout!
Figure 35. Partial Data Points Printout
1. EVERY POINT
2. EVERY 5 POINTS