Vanguard EZCT-S2 - Manual (Page 33)

REV 3 EZCT S2 USER’S MANUAL
29
NOTES
• You can press the [STOP] key to cancel the process.
• If you do not know the record number, you can first print a test
record directory using the instructions in section 3.3.3.
The following screen will be displayed momentarily:
Then the following confirmation screen will be displayed:
Press any key to return to the “START-UP” menu.
2. ERASE ALL RECORDS
Press the
[2]
key if you would like to erase all of the test records stored in the
EZCT S2’s flash EEPROM. The following confirmation screen will be displayed:
If you would like to cancel the erasure process, press the [STOP] key. No
records will be erased and you will be returned to the “START-UP” menu.
Press the [ENTER] key to continue with the erasure process. The following
screen will be displayed while the records are being erased:
The following screen will be displayed after all of the test records have been
erased:
Press any key to return to the “START-UP” menu.
RECORDS ERASED
ERASING RECORDS
PLEASE WAIT...
ERASE ALL RECORDS!
ARE YOU SURE?
“ENTER” TO CONTINUE
RECORD NUMBER 1
ERASED!
ERASING RECORD
NUMBER: 01
PLEASE WAIT...