Vestil ALL-T-2 User Manual
Page 9
Advertising
Step 5: Fix the wheel shaft in place.
J. Rotate the
wheel shaft
until the hole
for the retaining
pin aligns with
the opening in
the steering
shaft; then tap
the retaining
pin into place.
K. Reinstall the
cross-link and
tighten the
fasteners.
K
J
Step 6: Reconnect the wheels to the wheel shaft, by reversing the procedure described in Step 1 on p. 1.
Step 7: For storage purposes, a nylon strap is included in the tow bar accessory kit. Photos L and M below indicate one
possible method of using the strap to secure the tow bar in an upright (storage) orientation.
L
M
Advertising