Vestil PST series - Manual (Page 9)

9
HYDRAULIC DIAGRAM - EHLT & PST
Warning: Care should be taken to identify all potential hazards and comply with applicable safety
procedures before beginning work. Fully lower or securely support the platform, and ensure that system pressure
and power have been removed, before attempting to work on any of the hydraulic components.
Only qualified individuals trained to understand mechanical devices and their associated electrical and hydraulic
circuits should attempt troubleshooting and repair of this equipment.
Caution: Do not use brake fluid or jack oils in the hydraulic system. If oil is needed, use an antiwear hydraulic fluid
with a viscosity of 150 SUS at 100°F (ISO 32 at 40°C) or a non-synthetic transmission fluid.
E
N
G
L
I
S
H