Agilent Technologies E5805A - Manual (Page 8)

4 E5805A USB/RS232 Interface
E5805A USB/RS232 Interface
Driver Installation For Windows XP
1 You must be logged into an account with administrator
privileges.
2 Insert the “Agilent Driver” CD into your CD- ROM drive.
3 After connecting the USB cable, the Found New Hardware
Wizard appears. Click “Next,” and the drivers are
automatically installed from the CD. There are multiple
resources on the E5805A which have to be setup, so continue
to install resources until the XP installation completes.
Driver Installation For Windows 2000
1 You must be logged into an account with administrator
privileges.
2 Insert the “Agilent Driver” CD into your CD- ROM drive.
3 After connecting the USB cable, the Found New Hardware
Wizard appears. Select “Install from a list or specific location
(Advanced)” and click “Next”.
4 Select “Search for a suitable driver for my device” and click
“Next”.
5 Select “Specify a location” and click “Next”.
6 Type in <CD drive letter>:\Win2k and click “OK”.
7 Confirm that Windows is pointing to <CD drive letter>:\
Win2k. Then click “Next”.
8 There are multiple resources on the E5805A which have to be
setup, so continue to install resources until the Windows
2000 installation completes.
9 Windows then finishes installing the driver files.
10 Choose “Finish” to complete the driver installation.
Installation is complete when no more dialogs appear. Your new
COM port(s), numbered sequentially following the existing
ports in your system, are ready.