Vestil MTC-RB - Manual (Page 10)

Step 3 If deformity, corrosion, rusting, or excessive wear of structural members is present, DO NOT use the
compactor. Contact Vestil for instructions.
Step 4 Perform all other necessary adjustments and/or repairs.
The reader should understand the significant difference between necessary adjustments and
repairs, and modifications.
¾ An adjustment refers to a simple correction that restores the compactor to normal operating condition, such
as tightening loose fasteners, or removing dirt or other debris from the surface of the compactor; a repair refers to
replacing worn parts with new replacement parts.
¾ DO NOT use the compactor if adjustments and/or repairs are incomplete! Return the compactor to service
ONLY after finishing all necessary repairs and adjustments.
¾ A modification is a change that alters the compactor from its original condition, like bending the structural
members or removing part(s). NEVER modify the compactor without the express, written approval of Vestil.
Modifications may render the compactor unsafe to use. If Vestil approves a modification in writing, you are
responsible for labeling the equipment with the following information:
1. Name of the person(s) who performed the modifications;
2. Date modification(s) performed;
3. Description of modification(s).
Step 5 Contact Vestil for directions if a condition(s) are discovered during an inspection that is/are not addressed
in this manual.
Step 6 Make a dated record of the repairs, adjustments and/or replacements made.
M
ARKINGS
:
Only use the compactor if ALL labels are readable and undamaged. Contact Vestil for replacement labels.
Fig. 12 Label Placement
- 11 -