Vestil PAL-DR - Manual (Page 3)

3
ROUTINE MAINTENANCE & SAFETY CHECKS
BEFORE EACH USE INSPECT FOR THE FOLLOWING:
1.) Proper operation of the securing chain’s snap.
2.) Obvious damage to, or structural deformation.
3.) Wear or damage to the pallet carriage.
4.) Wear or possible damage to the pallet retaining fingers/stops.
INSPECT MONTHLY FOR:
1.) Inspect all moving parts, framework, and contact areas for signs of wear, fatigue or loosening. Tighten, adjust or replace
parts as necessary to prevent failure and maintain proper functions.
2.) Worn, loose, or damaged hardware on the safety chains/restraining strap and hinges.
3.) Damage to the fork pockets.
4.) The overall condition of the unit.
5.) The integrity of the welds at all joints.
6.) Overall squareness and rigidness of the platform.
7.) Information and warning labels being in place and in good condition.
8.) The need to clean off rust, dirt and debris.
• Maintenance and repairs are to be done only by personnel qualified to perform the required work.
• Caution: Do not perform any modifications to the platform without the manufacturer’s approval. Failure to receive
authorization for changes to the equipment could void the warranty.