Vestil NTAL - Manual (Page 4)

6/20/2011 Rev. 6/20/2011 NTAL portable tank ladder manual (0611).doc
Extension
mounting
bracket
Rung
mounting
bracket
FIG. 2C: Connection between upper
and lower ladder sections
5
Lower
ladder
section
FIG. 2B: Fasten upper and lower
ladder sections together
Upper
ladder
section
4
Assembly Instructions (NTAL-10, -12, & -15 models): Fasten upper and lower ladder sections together
1. Lay both sections on the ground and orient them with rungs facing upwards;
2. Press the extension mounting brackets (lower ladder section) into the openings in the siderails of the upper ladder
section (see FIG. 2B, above);
3. Align the bolt holes in the rung mounting bracket with the holes in the extension mounting bracket (as shown in FIG.
2C the extension mounting bracket will be inside the rung mounting bracket); AND
4. Feed a bolt (item no. 4) through each of the aligned bolt holes;
5. Secure the free end of each bolt with a hex nut.
4 of 7
Copyright 2011 Vestil Manufacturing Corp.