Vestil STOR-96 & 912 User Manual

Wner, Anual

Advertising
background image

STOR-96 and 912-G-W-1RH 0311

O

WNER

S

M

ANUAL

V

ESTIL

M

ANUFACTURING

C

ORP

.

2999 N. Wayne St., Angola, IN 46703
Ph: 260-665-7586 · Fax: 260-665-1339

E-mail: [email protected] · Website: www.vestil.com

S

TORAGE

S

HED MODELS

:

STOR-96-G-W-1RH

&

STOR-912-G-W-1RH

Introduction………………………. ……………….… 1
Assembly Instructions STOR-96-G-W-1RH .………..

2

Assembly Instructions STOR-912-G-W-1RH……...…8

STOR-96-G-W-1RH Exploded Parts Diagram & parts
List…………………………………………….…… 17
STOR-912-G-W-1RH Exploded Parts Diagram & Parts
List………………………………………………..... 18-19

I

MPORTANT

N

OTES

,

W

ARNINGS AND

S

AFETY

I

NSTRUCTIONS

Ensure that all employees understand and follow these instructions.

Failure to read and understand this owner’s manual before using or
servicing constitutes a misuse of the product.
All persons who will

install, use, or care for this product must be familiar with this material.

o

Ensure that all information / safety / warning labels stay in place and are

legible.

Do not perform any modifications to the unit without the manufacturer’s

approval. Failure to receive authorization for changes to the equipment
could void the warranty.

Maintenance and repairs are to be done only by personnel qualified to
perform the required work. Consideration will not be given for warranty

repair charges without prior written authorization by the manufacturer.

STOR-96-G-W-1RH

______________________________

R

ECEIVING

I

NSTRUCTIONS


It is possible that this product

could incur damage during
transit.

Inspect the unit closely when

it arrives. If you see evidence

of damage or rough handling to
either the packaging or to the

product when it is being
unloaded, immediately make a
note of it on the Bill Of Lading!

It is important that you

remove the product’s packaging

upon its arrival to ensure that
there is no concealed damage

or to enable a timely claim with
the carrier for freight damage.

Also verify that the product

and its specifications are as

ordered.

T

OOLS

R

EQUIRED

-7/16” socket or wrench
-1/2” socket or wrench
-5/16” nut driver for drill
-Level
-Eye/Hand protection advised

Note – At least two people

required to assemble this
product; three suggested

STOR-912-G-W-1RH

Copyright 2011 Vestil Mfg. Co.

Page 1 of 20

Advertising