VIAIR 70P - Manual (Page 3)

70P PORTABLE COMPRESSOR
FEATURES:
1. Heavy duty, gearless, direct driven motor.
2. Low noise operation (65dB).
3. Equipped with automatic reset thermal overload protector.
4. Piston type compressor.
5. Includes a full set of nozzle adapters.
6. Oil-less design, maintenance free.
7. Compact size for easy carrying and storage.
8. High strength stainless steel valves.
9. Anodized aluminum alloy cylinder.
10. Durable high performance Piston Ring
OPERATING INSTRUCTIONS:
INFLATING TRUCK & UTILITY VEHICLE, CARS & MOTORCYCLE TIRES:
IMPORTANT: Engine must be running while using this compressor.
1. The compressor is designed to operate on 12 volts DC. To obtain power,
plug the power cord into a 12 volt cigarette lighter socket or other 12-volt power source.
2. Start vehicle’s engine to provide charging voltage.
3. Attach the end of the air hose to the tire valve stem.
4. Turn the compressor power switch to ON and begin to inflate tire.
5. When the pressure gauge indicates the desired pressure, switch the unit OFF and
remove the air hose from the tire valve stem.
FOR ALL OTHER INFLATABLE OBJECTS, INCLUDING BICYCLE TIRES,
RUBBER BOATS, TOYS, AIR MATS AND SPORTS BALLS:
CAUTION: To avoid over inflation, never exceed recommended pressure on articles to be inflated.
Bursting articles can cause serious injury.
1. A selection of inflation tips is provided to fit most inflatable objects.
Simply screw the appropriate nozzle into the tip of the air hose.
2. Attach the appropriate nozzle to article to be inflated and turn the power switch
to the ON position.
3. When article is inflated to desired firmness, turn the compressor off. Do not over inflate.
MAINTENANCE INSTRUCTIONS:
Turn OFF and unplug Air Compressor. Your air compressor is equipped with permanently lubricated,
maintenance-free motor. Never try to lubricate the compressor. Use only mild soap and a cloth
dampened with hot water to clean plastic parts. Avoid any type of detergents or solvents, which
might contain chemicals that could damage plastic portions or painted surfaces of the compressor.
All other services should be performed by a qualified person.
USER MANUAL