VIAIR 90P - Manual (Page 3)

90P PORTABLE COMPRESSOR
FEATURES:
1. Heavy duty, gearless, direct driven motor.
2. Low noise operation (67dB).
3. Equipped with automatic reset thermal overload protector.
4. Piston type compressor.
5. Includes a full set of nozzle adapters.
6. Oil-less design, maintenance free.
7. Compact size for easy carrying and storage.
8. High strength stainless steel valves.
9. Anodized aluminum alloy cylinder.
10. Durable high performance Piston Ring.
11. Deluxe carry bag.
12. 5-ft heavy duty heat-resistant rubber hose with built-in push button bleeder valve.
13. Dual battery clamps with 30-amp fuse holder.
OPERATING INSTRUCTIONS:
IMPORTANT: Engine must be running while using this compressor.
Before attaching air compressor’s power cord to power source, check to make sure that the
ON/OFF switch of your compressor is in the OFF position. Attach the Positive battery clamp (Red)
to the Positive terminal of the battery and the Negative battery clamp (Black) to the Negative terminal
of the battery.
CAUTION: Your Portable Air Compressor is Moisture and Dust Resistant, but NOT WATER OR DUST
PROOF. Never place compressor in soft sand while running the compressor. Vibration from the
compressor will cause the compressor to settle into soft sand, resulting in compressor drawing in
foreign particles. Never expose compressor to water while running the compressor.
This air compressor comes with 5 ft. heavy-duty heat-resistant rubber hose with push button
bleeder chuck. The inflation/deflation hose can be used for both airing up and airing down.
Please familiarize yourself with the following different functions of this versatile air tool:
TIRE INFLATION:
1. Push the tire chuck, with the lever in the upright position, down over the tire valve stem
and then push the lever down to lock in place.
2. Check to make sure the push button bleeder valve is disengaged.
3. Turn compressor switch to ON position to begin inflation.
When desired pressure is reached, turn compressor OFF.
CAUTION: To avoid over inflation, never exceed recommended pressure on articles to be inflated.
Bursting can cause serious injury.
HANDS-FREE CONTINUOUS AIR DOWN:
1. Push the tire chuck, with the lever in the upright position, down over the tire valve stem
and then push the lever down to lock in place.
2. Push the bleeder valve button down to engage lock.
3. When desired pressure if reached, press bleeder valve button to disengage lock.
IMPORTANT: Make sure compressor sits upright while operating compressor. Do not operate
compressor in any other position. Avoid tugging at compressor to move it. Instead, move
compressor to the same side of vehicle as tires that are being aired up.
Always make sure the Portable Compressor’s 12ft. power cord is uncoiled and fully extended
when using your air compressor to avoid overheating the power cord.
USER MANUAL