Safety precautions, Maintenance & repairs, Model 400p specifications – VIAIR 400P User Manual

Page 4: Limited warranty

Advertising
background image

SAFETY PRECAUTIONS:

1. Always inflate tires to manufacturer’s recommended tire pressures. Exercise extreme caution

when driving with aired-down tires. Reinflate tires before high-speed roadway travel.

2. Never exceed 20 M.P.H. when driving with partially inflated tires.

3. Never make sharp turns while driving with reduced tire pressure.

4. Re-inflate tires before high speed traveling onto roadways.

5. Use heat-resistant, minimum 200 PSI-rated working pressure extension hose.

Do not use aftermarket hoses with less than 200 PSI working pressure.

Some aftermarket hoses may not be suitable for use with this air compressor due to heat and

pressure typically generated by this type of air compressors.

6. The use of a close-ended tire chuck will cause excessive pressure buildup if tire chuck is not

attached to tire valve stem while air compressor is in operation.

IMPORTANT: Always use an Open-Ended tire chuck such as the tire chuck equipped on the

Deflator/Inflator Coil Hose for tire inflation when using a compressor without an air tank.

CAUTION: The extension hose and fittings connected extension hose will become very HOT during

and after use. If necessary, wear heat resistant gloves to remove hose from the compressor quick

connect stud.

MAINTENANCE & REPAIRS:

Your air compressor is equipped with permanently lubricated, maintenance-free motor. Never try

to lubricate the compressor. Regularly clean dust and dirt from compressor cooling fins and motor

housing. All repairs should be performed by Manufacturer or Manufacturer authorized service

agencies only.

MODEL 400P SPECIFICATIONS:

Part Number:

40043 / 400P

Motor Voltage:

12-volt

Motor Type:

Permanent Magnetic

Max. Intermittent Pressure:

150 PSI

Max. Duty Cycle:

33% (15 on / 30 off)

(Min. On/Off @ 72ºF & 100 PSI)

Continuous Use @ 72ºF & 30 PSI:

Approx. 40 Minutes

Max. Current Consumption:

30 Amps

Fuse:

40 Amps

Inline Pressure Gauge:

160 PSI

Auto. Reset Thermal Protection:

Yes

400P PORTABLE COMPRESSOR

LIMITED WARRANTY:

VIAIR Corporation warrants this product, when properly installed

and under normal conditions of use, to be free from defects in

workmanship and materials for a period of one year from its

original date of purchase. To receive warranty service or repair,

please contact VIAIR Corporation.

Returns should be made within one year of the date of purchase,

after a Return Goods Authorization (RGA) number has been

assigned by VIAIR Corporation. To obtain RGA, fax a copy of

your receipt to (949) 585-0188. For complete warranty details,

please visit:

www.viaircorp.com/warranty

PLEASE NOTE: THIS WARRANTY COVERS PRODUCT DEFECTS

ONLY; IT DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL

DAMAGES AS RESULT OF MISUSE OR ABUSE.

15 EDELMAN • IRVINE, CA 92618

TEL: (949) 585-0011

FAX: (949) 585-0188

www.viaircorp.com

Advertising