AMX NXD-CV7 - Manual (Page 14)

Introduction
6 7" Modero Widescreen Touch Panels
CV7 Panels - Connector Layout
FIG. 3 shows the layout of the connectors (located on the rear of the base on the NXT and on the
left side panel of the NXD panels).
Specifications for 7" Widescreen Video Touch Panels (Cont.)
Optional Accessories:: • NXT-BP (FG2255-10)
- Battery pack for Table Top panels.
• NXT-CHG Kit (FG2250-50K)
- 1 battery charger and 2 NXT-BP batteries
• PSN2.8: Power Supply (FG423-17) with 3.5 mm mini-Phoenix connector
• PSN4.4: Power Supply (FG423-45) with 3.5 mm mini-Phoenix connector
• PSN6.5: Power Supply (FG423-41) with 3.5 mm mini-Phoenix connector
Upgrade Compact Flash (factory programmed with firmware):
NXA-CFSP128M - 128 MB Compact Flash card (FG2116-36)
NXA-CFSP256M - 256 MB Compact Flash card (FG2116-37)
NXA-CFSP512M - 512 MB Compact Flash card (FG2116-38)
NXA-CFSP1G - 1 GB Compact Flash card (FG2116-39)
It is recommended that firmware KIT files only be transferred over a direct USB
or Ethernet connection and only when the panel is connected to a power
supply. If battery power or wireless connection fails during a firmware upgrade,
the panel flash file system may become corrupted.
FIG. 3 Connector layout on the CV7 touch panels
PRO GRAM ETHERNET
10/100
A L
12VDC
AUDIO / VIDEO
M OUSE
KEYBO ARD / PW R
Audio-Video from
Ethernet (CAT5)
Power
Keyboard/Mouse
Mini-USB
NXA-AVB/ETHERNET (CAT5)
(Program)
(USB)
Stereo Output
NXT-CV7 - connectors located
on rear panel of the base
NXD-CV7 - connectors located
on left side panel