WARN WG9 WINCH (Standard Drum) - Manual (Page 2)

Maximum System Pressure: N/A psi N/A BAR
Maximum Motor Pressure Drop: N/A psi N/A BAR
Maximum Rated Input Flow: N/A GPM N/A LPM
image
Pull from top of winch
Feet forward
Pull from top of winch
schematic
987549.B1 9/2012
12900 S.E. Capps Road,
Clackamas, OR USA 97015
Customer Service (North America): 1.800.543.9276
Customer Service (International): 1.503.722.3008
FAX: 1.503.722.3000 www.warn.com
WARN INDUSTRIES, INC
Industrial Products
image
Notes:
Performance data based on 6.0ci motor.
Maximum Input Speed: 585 rpm
Maximum Input Torque: 800 in*lb (90 N*m)
Drum Rotation is Clockwise when viewed from Motor End with
Clockwise shaft input.
Feet down without angle brace
image
image
Angle Braces Only
Control Valve Type:
3-position, 4-way, closed
center, spring return
(cylinder spool)
Pull from top of winch
image Control Valve Schematic
Feet forward
Feet down with angle brace
image
Feet down
Pull from top of winch Pull from bottom of winch
Recommended Mounting- Always Observe Correct Drum Rotation Hydraulic System Specifications
Model
90100
Part Number
WARN Industrial Winch
outline drawing
WG9-C-00
Standard Drum
Manual Clutch
Pull from bottom of winch
Motor Type
Not Supplied
Units are given in inches [millimeters], unless otherwise specified
2-bolt SAE "A"
motor flange, 1 inch
keyed shaft