Installation, Connection, Mounting diagram – Warner Electric CBC-100 User Manual

Page 2: Dimensions

Advertising
background image

2

Warner Electric • 800-234-3369

P-266

819-0472

Installation

To avoid injury (or even death),

always make certain all power is off before

attempting to install this control or any electrical

equipment.
1. Conduit Box Mount

a. Mount the conduit box to the magnet

assembly per the instructions found in the

manual shipped with the clutch or brake.

b. Connect wires to the power source, switching,

and magnet coil per the Connection diagram

and the following instructions:

1. Connect the red wire to one of the magnet

terminals.

2. Connect the red/white stripe wire to the

other magnet terminal.

3. Connect the hot side of the power source

to the black/red wire through the fuse and

switch as shown.

4. Connect the neutral side (other hot side for

the CBC-100-2) to the white wire.

c. Attach the cover with the CBC-100 to the

conduit box.

2. Panel Mount

a. Mount the CBC-100 in a convenient location in

the conrol panel using the Dimensions dia-

gram. NOTE: A barrier strip or terminal strip is

recommended for wiring between the CBC-

100 and the external connections to the brake

or clutch, switch, fuse, and power source.

b. Connect the power source, switching, and

magnet coil per the Connection diagram and

the following instructions:

1. Connect the red wire to one of the magnet

terminals.

2. Connect red/white strip wire to the other

magnet terminal.

3. Connect the hot side of the power source

to the black/red wire through the fuse and

switch as shown.

4. Connect the neutral side (other hot side for

the CBC-100-2) to the white wire.

This is a floating-type power supply

and is not referenced to AC ground. Under no

circumstances should any of the output wire leads

be connected to earth or chassis ground as the unit

will be destroyed.

Connection

FUSE

SWITCH

BLACK/

RED

HOT

CBC-100-1

120 VAC

CBC-100-2

220/240 VAC

NEUTRAL

USER FURNISHED

WHITE

CBC-100

RED

RED/WHITE

90

VOLT

Mounting Diagram

2.18"

(55.4)

1.34"

(34.0) MAX.

0.166" (4.2) DIA.

MOUNTING HOLE

FOR #6 SCREW

0.625"

(15.9)

0.625"

(15.9)

MAX.

Dimensions

BLACK/RED

WHITE

RED

RED/WHITE

CBC-100

Advertising