Atlas Sound FAP8CXT - Manual

AtlasSound.com
1/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2008
Atlas
Sound
LP
. All
rights
reserved.
Atlas
Sound
is
a
trademark
of
Atlas
Sound
LP
.
A
TS002701
RevA
8/08
Strategy Series ® II Coaxial Loudspeaker System
FAP8CXT
Features
• Extended Low Frequency Response from the Optimally Tuned &
Ported Deep Drawn Galvanized Steel Enclosure (937 in 3 )
• Unique “Trap Door" Input Section Allows for Through Conduit Runs
with Rigid or Flex Conduit
• 1" Exit Compression High Frequency Driver Coupled to a Specially
Designed Conical Wave-Guide Horn Provides Exceptional Output &
Accurate High Frequency Reproduction
• 90° Conical Dispersion (2 kHz Octave Band)
• Front Mounted Tap Selector Switch for Easy System Tuning
Adjustments (1.9 Watts – 60 Watts @ 70.7V Plus 8Ω Setting)
• Includes C-Ring and V-Rails for Ceiling Mounting
• “Press-Fit" Grille to Better Blend Into Contemporary Architecture
Technical Specifications
Depth: 22 3 ⁄
4
" (578 mm)
Diameter: 15 3 ⁄
4
" (401 mm)
Shipping Weight: 23 lbs (10.43 kg)
Frequency Response: 60 Hz – 15 kHz (±5 dB)
Power Taps: 7.5, 15, 30, 60, & 8Ω
Speaker Type: Coaxial
Dispersion: 90°
Sensitivity: 92 dB Average
Crossover Frequency: 2 kHz
Applications
The Atlas Sound FAP8CXT is a true compression driver premium
performance 70.7V / 100V, tuned & ported 8" coaxial ceiling speaker
system. The system is perfectly suited for many business music and
public address applications where high ceilings require loudspeakers with
increased efficiency and tighter pattern control.
The FAP8CXT System has a 90° dispersion angle and is well suited for
higher ceiling applications where tighter pattern control is required.
The FAP8CXT features a curvilinear, polypropylene cone for lower
harmonic distortion and a built-in 2 kHz crossover network for proper
frequency transition between the two transducers. This loudspeaker is
factory assembled in an optimally tuned & ported deep drawn enclosure
and includes a specially designed 60 Watt high performance 70.7V/100V
transformer. A convenient, front mounted, multi-position selector switch
allows tap adjustment without the need to remove the speaker from
the ceiling. This tap selector switch also includes a transformer bypass
setting for instances where the FAP8CXT driver is direct coupled to a low
impedance amplifier.
FAP8CXT
FAP8CXT
with Grille